Jumping Jack Flash weblog

Programmi freeware per motion detection con webcam

Posted in Uncategorized by jumpjack on 3 marzo 2010

Appunti sulla ricerca del miglior programma freeware di gestione webcam da utilizzare per videosorveglianza tramite motion detection.




Non richiede installazione
Motion detection
Salvataggio locale (image+video)
Internet broadcasting
Webcam singola + istanze multiple
Testo/immagini in sovraimpressione
Supporto multiwebcam freeware
Motion detection
Aree motion detection (funzionano?)
Allarmi via FTP, LAN, Salvataggio locale, Email, Audio
Vkartinek programma russo
Free: 1 cam
5 (cinque)  dollari: fino a 8 cam
Motion detection
Internet broadcasting
no rete

MJPEG Surveillance 2.0

Sembra fare le stesse cose di SecureCam, sullo stesso sito:
motion detection
no rete
IP camera
aree motion detection


No motion-detection
Forum-fregatura (spam)
No istanze multiple
Webcam singola
Solo salvataggio locale
Molti effetti di sovramimpressione



Motion detection camera
Motion detector
Imps(TM) Motion
Milestone (freeware: 1 cam)
Vari programmi su Sourceforge

V.R.C.C. (Video Remote Computer Camera) is a freeware and open source system that enables your symbian smartphone to be used as a Webcam and lets you control the smartphone from the PC.

The system is comprised of two applications, one for the smartphone and one for the PC that communicate using a protocol over a variety of data transmission methods.

Currently the only phones with UIQ3 interface are supported, however you can vote for features including support for other Symbian platforms.


WebCam Viewer is a small tool that allows you to monitor web cams from all over the world. The program can automatically refesh and cycle through the list of web cams. It can also run in fullscreen mode. WebCam Viewer comes pre-loaded with several web cam location, and you can edit existing cams or easily add your own.


WebCam Spy allows you to open a file of internet image addresses, and have those images dynamically downloaded and automatically refreshed over the internet. You can still observe your favourite Cam while surfing around the internet. Many features like Zoom, Save, Stay on top, Gallary, Notify. You can upload your own webcam also.
Magellan is a software package that enables you to broadcast live video from your webcam over the Internet. It provides facilities to record, detect motion, dial-up access, set preset positions, chat with visitors, zoom in & out and all with complete security. Visit http://www.eyespyfx.com for details.This software works with the EyeSpyFX Magellan Pan & Tilt unit for webcams. This neat little device allows you to move your webcam remotely.

Cam In Style is the first free webcam broadcasting software and service which supports 3D anaglyph broadcasting from two webcams.Cam In Style is free. The software is free. The basic service is free. Download and install the software, create a Cam In Style account, and your webcam will be online in five minutes, ready for you to share with your friends, families and the world.

VideoMonitor software supports prompt webcam and USB cam control for remote viewing activities of every employee or different areas of the organization. The utility aids you in viewing 36 cameras with exclusive features.


Rise SunSingola webcam
Motion detection
Problemi con alcune tlc
Solo salvataggio, no rete

TV tuner support – change channels form anyhwere
IP cameras (JPEG and Motion JPEG) supported,
Pan/Tilt/Zoom with Axis, Panasonic and LevelOne PTZ cameras
Image overlay with transparency support
FTP Upload: detected motion or current snapshot in intervals, with or without caption, secure connections (SSL, SFTP supported
Local Save: store detected motion or snapshots on your computer, with or without caption
Use the motion detection to have your PTZ device follow motion automatically
“The ‘Free Version’ provides basic video motion detection and issues selectable sound alarms. Video Motion Detection, Source, and Format parameters are setable. Detection can be calibrated. Live Video Window and Motion Detected Windows shown. Look outside from inside.
No motion detection
Problemi con alcune cam

Abel Webcam
Free: solo una webcam

Avvio lunghissimo

Tutte le funzioni bloccate (??? perche’ free o perche senza accesso internet?)


grabMotion is a  webcam application with motion detector that is able to send
emails with image attachments. You can set the detection area, set a

scheduler for each day, you can limit the mail sending and the sound alarm.Images can be saved on disk, status bar on the image is present. The motion detector is very easy to set, because you see what the computer sees… .Using commercial Gateway you can receive SMS/MMS on mobileNON PIU’ SVILUPPATO?


HomeWatch is a newly developed intelligent software to perform security in your home, office or any location of the property. By using the video capture function of MS Windows, software detect any Webcam video motion and X10 sensor signal. When it is trigger, it will notify the end user by phone call. You can also remote view image via Internet with our remote monitor software. Turn On/Off and X10 home appliance. Disable or enable HomeWatch function via any touch tone phone.
Supporta motion detection (!)
Solo salvataggio in locale (singole immagini o filmato unico)
No rete
Singola webcam, ma supporta istanze multiple (eseguibili separati)
Supporta anche webcam “difficili”
Non richiede installazione

TrueTech WebCam Personal Edition 2.25

richiede registrazione online, KO


* Watch real time webcam video stream on your computer.
* Get motion detection alerts over email.
Be notified of all motion detections and instantly watch a video stream from a place you observe or look trough the recordings later.
* Almost any web / network camera support.
You can watch up to 4 web / network cameras simultaneously.* Ability to define areas for motion detection.
* Motion detector alerts.
Get email notifications with snapshots when any motion is detected
* Quick and easy discovery of detected movement 24/7 with the calendar inside!
* Customized scheduling for recording start/finish.
H264 WebCam Free is a 4-channel h264 remote video surveillance software for Windows. This software has an advanced video motion detection algorithm.
This is the basic product for home-users.It lets you to stream via HTTP, Windows Media or to upload via FTP/FTPS or HTTP/HTTPS Post.
It also lets you add overlays / watermarks over your video streams and the basic features such as capturing or recording at fixed interval.
This version is ideal for putting live webcam on your web page and is robust for 24/7 broadcasting.
Supports a single video source.
Solo servizio online


30 euro per singola webcam


SplitCam ( splitcamera.com ) – virtual video capture driver allows for connecting several applications to a single video capture source.

Trasforma l’intero schermo in una sorgente video da usare come webcam virtuale

Programma completo di domotica, opensource!
Amigo – software opensource di domotica? (indagare)

altro link

Programma opensource spagnolo di domotica per Linux
Zoneminder – solo linux, complicatissimo

Fornitore di schede per controllo remoto a basso costo (rele’ comandati da USB) e altro:




Yawcam – http://www.yawcam.com/

Tebocam – http://teboweb.com/WebCam.html




iSpy – http://ispy.developerinabox.com/

DORGEM (non più sviluppato) – http://dorgem.sourceforge.net/

SecureCam – http://securecam.sourceforge.net/

Motion Detection Algorithms in C# – http://www.codeproject.com/KB/audio-video/Motion_Detection.aspx?msg=3639112#xx3639112xx


ZoneMinder (Linux) – http://www.zoneminder.com/

3 Risposte

Subscribe to comments with RSS.

  1. bb said, on 7 ottobre 2010 at 3:13

    please don’t forget Yawcam:

  2. […] Programmi freeware per motion detection con webcam […]

  3. Penelope said, on 8 marzo 2013 at 0:26

    My developer is trying to persuade me to move to .

    net from PHP. I have always disliked the idea because of the costs.
    But he’s tryiong none the less. I’ve been using WordPress on several websites for about a year and am anxious
    about switching to another platform. I have heard great things about blogengine.
    net. Is there a way I can transfer all my wordpress posts into
    it? Any kind of help would be really appreciated!

Puoi inserire un commento qui sotto; diventerà visibile dopo la moderazione dell'amministratore

Inserisci i tuoi dati qui sotto o clicca su un'icona per effettuare l'accesso:

Logo di WordPress.com

Stai commentando usando il tuo account WordPress.com. Chiudi sessione /  Modifica )

Google photo

Stai commentando usando il tuo account Google. Chiudi sessione /  Modifica )

Foto Twitter

Stai commentando usando il tuo account Twitter. Chiudi sessione /  Modifica )

Foto di Facebook

Stai commentando usando il tuo account Facebook. Chiudi sessione /  Modifica )

Connessione a %s...

%d blogger hanno fatto clic su Mi Piace per questo: